Networking; Installing An Ocp Network Adapter - Hitachi HA820 G3 Series User Manual

Networking

Installing an OCP network adapter

Prerequisites
Before you begin this procedure, make sure that the components included with the hardware option kit are
available.
Procedure
1. Power down the server.
Remove all power:
2.
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
Do one of the following:
3.
•
Extend the server from the rack.
•
Remove the server from the rack.
4. Remove the access panel.
Remove the rear wall blank or riser cage.
5.
Remove the OCP adapter blank.
6.
Install the network adapter.
7.
Networking
78