Checking Safety Labels; Server Module Labels - Hitachi DS7000 Installation Manual

1.3.

Checking Safety Labels

Safety warning labels, including safety notices and graphic symbols, are visible
on the server. Check that the electrical installation in place complies with the
label details.
1.3.1.

Server Module Labels

Server Identification Label
The label is located on the side of the server.
A
B
C
D
E
F
G
1-4 Installation Guide
Mark
Certification information
Recycling symbol: it is mandatory to reuse and recycle
electronic and electrical equipment properly
Electric hazard symbol: Caution! Risk of electric shock
Multiple power sources symbol: Caution! The system has
more than one power source which must all be disconnected
before servicing to avoid shock hazard
ProtectivE conductor symbol: Caution! The system has a high
protective conductor current. The protective conductor (PE)
should be connected first to main protective earthing
terminal before connecting the line and neutral to avoid
shock hazard, and a PE connection to the main PE terminal is
essential before connecting the mains to avoid electric shock
Altitude symbol: the system must not be operated at an
altitude higher than 2000 meters
Tropicalization symbol: the system must be operated within
the adequate limits of temperature and humidity
Description