Huawei OceanStor N8500 T Series Installation Manual page 92

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Context
Procedure
Step 1 Plug the D-shaped connector of the power cable that comes with each component to the power
socket of the rear panel.
Step 2 Use a buckle to sure the AC power cable.
1.
Issue 02 (2015-09-22)
NOTE
l For a cabinet equipped with the Power Distribution Unit (PDU), the AC power cable is used to connect
the AC socket of each component to that of the PDU.
l For a cabinet equipped with the PDB, the AC power cable is used to connect the AC power socket
of each component to the PDB output power connector.
While releasing the latch on the buckle as shown in a of step 1 in
buckle to the joint between the AC power cable and socket as shown in b of step 1 in
5-33.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 N8500 Installation (with the S2600T Storage System as the
Storage Unit)
Figure 5-33, slide the
Figure
83