Huawei OceanStor N8500 T Series Installation Manual page 328

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Recommended Tools and Materials
The recommended tools and materials for making external power cables and ground cables with
ring terminals are as follows.
Tools:
l
l
l
l
l
l
Materials:
l
l
l
l
Procedure
Step 1 Peel off a section of the insulation layer C from the power cable based on the cross-sectional
area of the power cable conductors. A section of power cable conductor D with a length of L1
is exposed, as shown in
layer to be peeled off (L1).
Figure 14-17 Peeling off the insulation layer of the power cable
Issue 02 (2015-09-22)
Power cable crimping tool
Hydraulic pliers
Paper knife
Diagonal pliers
Wire clipper
Heat gun
Power cables
Insulation tape
Ring terminals
Heat shrink tube
Figure
L
B
L1
D
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14-17. Table 14-3 lists the recommended lengths of the insulation
C
14 Making Cables and Connectors
319