Connecting The Cnen To The Maintenance Terminal - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Procedure
Step 1 Determine the number of SUDs you want to connect to one SUC. Then find the corresponding
connection diagram.
Step 2 Select a proper length of mini SAS cables.
The length of mini SAS can be 1 m, 3 m, or 6 m. If the distance between two devices you want
to connect is longer than the maximum cable length, you are advised to adjust the devices
locations in the cabinet first by referring to
Step 3 Route and bind the cables.
----End

7.19 Connecting the CNEN to the Maintenance Terminal

This section explains how to connect the CNEN to the maintenance terminal. After the CNEN
is connected to the maintenance terminal, you can utilize the maintenance terminal to manage
and maintain the CNEN.
Prerequisites
The following tools and materials have been ready:
l
l
l
l
Context
CNENs can be connected to the maintenance terminal through different types of ports:
l
Issue 02 (2015-09-22)
NOTE
For details on how to route and bind cables, see
Cable Routing and Bundling
Network cables (collaborating with management network ports)
RJ-45 to DB9 serial cables or double RJ-45 serial cables (collaborating with serial ports)
Cable ties
Diagonal pliers
As shown in Figure 7-31, each CNEN provides one management port. You need to connect
the maintenance terminal and all CNENs' management ports to the same management
network.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 N8500 Installation (with S5600T, S5800T or S6800T
2.1 Before You
12 General Cable Routing Description
Technology.
Storage System as the Storage Unit)
Install.
and 13 Basic
206