Connecting Multiple Suds To One Suc - Huawei OceanStor N8500 T Series Installation Manual

Clustered nas storage system
Table of Contents

Advertisement

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
l Switch connection:
Step 3 Route and bind the cables.
----End

7.18 Connecting Multiple SUDs to One SUC

This section explains how to connect multiple SUDs to one SUC through mini SAS cables or
optical fibers.
Prerequisites
The following tools and materials have been ready:
l
l
l
l
When an SUD is connected to an SUC through the Fibre Channel port, a 4 Gbit/s optical
transceiver required by the SUC's 4 Gbit/s Fibre Channel expansion port will be obtained from
the SUD using either of the following methods:
l
l
Context
For an N8500 with the S5600T, S5800T or S6800T storage system, connecting multiple SUDs
to one SUC by conforming to the following principles:
l
Issue 02 (2015-09-22)
Connect two Fibre Channel ports on each CNEN respectively to any 8 Gbit/s Fibre Channel
port separately on SUCs A and B.
1.
Connect two Fibre Channel ports on each CNEN respectively to two Fibre Channel
switches.
2.
Connect two Fibre Channel ports on each SUC's controller A and on each SUC's
controller B respectively to two Fibre Channel switches.
NOTE
For details on how to route and bind cables, see
Cable Routing and Bundling
Mini SAS cables (applicable to the SUD with SAS expansion ports)
Optical fibers, optical bundling tape, 4 Gbit/s optical transceivers (applicable to the SUD
with Fibre Channel expansion ports)
Cable ties
Diagonal pliers
For the loop in which the configuration disk enclosure (namely, the SUD housing coffer
disks) reside, obtain one 4 Gbit/s optical transceivers separately from the second SUD and
the last SUD (the configuration disk enclosure is considered as the first disk enclosure, and
other disk enclosures above the configuration disk enclosure are numbered from the bottom
up).
For other loops, obtain one 4 Gbit/s optical transceivers separately from the first SUD and
the last SUD (numbered from the bottom up).
All EXP ports can connect only to PRI ports.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 N8500 Installation (with S5600T, S5800T or S6800T
12 General Cable Routing Description
Technology.
Storage System as the Storage Unit)
and
13 Basic
201

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oceanstor n8500 v200r002Oceanstor n8500 v100r005

Table of Contents