Huawei OceanStor N8500 T Series Installation Manual page 250

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
2.
3.
Step 3 On the main interface of OceanStor Toolkit, click I have confirmed that networking is
correct, and click start deployment.
Step 4 Follow the clustered NAS deployment wizard to configure the deployment tool.
1.
2.
Issue 02 (2015-09-22)
In the navigation tree, click Deploy.
In the function pane, click Clustered NAS Deployment to initiate the deployment tool.
In the Step 6-1: Welcome window, read precautions and click Next.
In the Step 6-2: Configuration File window, select an information input mode.
l Automatically importing the configuration file
Download a configuration file template and fill it out.
parameters.
Table 9-2 Parameter description
Device
Type Parameter
Storage Username
Units
Password
Controller
A IP
Address
Controller
B IP
Address
Controlle SN
r
Enclosur
es (Disk
Enclosur
es)
Rack ID
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Default user name. The default value is admin.
l Default password for the S2600T, S5500T, S5600T,
S5800T or S6800T. The value is Admin@storage.
Any change made for the password of user master of the
clustered NAS engine will be synchronized to the
password of user admin of the storage unit. After the
synchronization, the passwords of user master and user
admin are the same.
NOTICE
You are advised to keep your user name and password
unchanged after completing the configuration. Changing the
user name or password will cause a failure to discover storage
units and interrupt ongoing services.
IP address of controller A. The initial value is
192.168.128.101.
IP address of controller B. The initial value is
192.168.128.102.
NOTICE
You are advised to keep your controller IP address unchanged
after completing the configuration. Changing the IP address will
cause a failure to discover storage units and interrupt ongoing
services.
An SN tag that is attached in the mounting ear on the right
of the front panel. The SN is displayed in the format of
Type: 21XXXXXXXX S/N: ZXXXXXXXXX. When
filling out the template, combine these two parts as
21XXXXXXXXZXXXXXXXXX.
ID of the cabinet in which the controller enclosure or disk
enclosure resides.
9 System Initialization
Table 9-2 lists configuration file
241