OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Step 7 Use a network cable tester or a multimeter to test all the wires, and ensure that the wires are
connected properly.
Step 8 Push the boot to cover the RJ-45 connector, as shown in
Figure 14-6 Pushing the boot to cover the RJ-45 connector
----End
14.2 Making Shielded Twisted Pair Cables
This section describes how to make shielded twisted pair (STP) cables.
Components of an STP Cable
An STP cable consists of two shielded RJ-45 connectors and one shielded twisted-pair cable.
Figure 14-7
Figure 14-7 STP cable
RJ-45 connector
Issue 02 (2015-09-22)
shows the STP cable.
Boot
shielded twisted-pair cable
Shield iron cover
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 Making Cables and Connectors
Figure
14-6.
313