Huawei OceanStor N8500 T Series Installation Manual page 330

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Figure 14-18 Installing heat shrink tube and ring terminal
After the ring terminal is installed, the length of the bare conductor outside the ring terminal
(L2) must not be more than 2 mm. If L2 is larger than 2 mm, cut the redundant part by using the
diagonal pliers or wire clipper, as shown in
Step 4 Use the power cable crimping tool to clamp the tail of the ring terminal and the contact part of
the conductor, as shown in
Figure 14-19 Clamping the tail of the ring terminal with the contact part of the conductor
Step 5 Push the heat shrink tube A towards the ring terminal, and cover the crimping area of the ring
terminal and the conductor. Use a heat gun to heat the heat shrink tube, as shown in
14-20.
Issue 02 (2015-09-22)
L2
B
NOTICE
NOTE
The crimped shape vary with the crimping mold.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
C
A
Figure
Figure 14-19.
14 Making Cables and Connectors
14-18.
Figure
321