Filling In Labels; Affixing Labels - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)

15.3 Filling In Labels

You can write the contents on the labels by using an oil marker.
Writing Tool
To maintain the labels legible and neat, use a black oil marker (excluding a ballpoint pen) to
write on the labels.
In special cases, you can use a black ballpoint pen, although it is not recommended to use a
ballpoint pen. An marker pen is more effective compared to a ballpoint pen. When you use a
marker pen to write on the labels, ensure that the surface of the labels is not oily. The oil can
smudge the letters.
Writing Font
The handwritten font must be similar to the standard typeface "Times New Roman" so that it is
clear and legible.
Table 15-1 Standard typeface for handwriting
0
9
I
R
The typeface for handwriting should be of a proper size. When you fill in the label in Chinese
font, the size of the Chinese font must be proper, and the Chinese font must be legible and neat.
Figure 15-4
Figure 15-4 Writing direction on the label
1

15.4 Affixing Labels

This section describes how to affix a label for a signal cable and for a power cable.
Issue 02 (2015-09-22)
NOTE
The delivered marker has two nibs. Use the smaller nib to write on the labels.
Table 15-1
1 2
A B
J K
S T
shows the writing direction.
A 01 2 A 06
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
lists the standard typeface.
3 4
C D
L M
U V
5 6 7
E F G
N O P
W X Y
15 Cable Labels
8
H
Q
Z
327