Connecting Cnens To The Service Network - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
l Switch connection
Step 3 Route and bundle cables.
----End

5.16 Connecting CNENs to the Service Network

This section explains how to connect CNENs to the NAS service network.
Prerequisites
The following tools and materials have been ready:
l
l
l
Context
By default, each CNEN is equipped with four service network ports.
CNENs can connect to the service host directly or through switches:
l
Issue 02 (2015-09-22)
2. Connect one end of the network cable to heartbeat network port P2 on one CNEN and
the other end to heartbeat network port P2 on the other CNEN.
1. Connect heartbeat network port P0 on each CNEN to one Ethernet switch.
2. Connect heartbeat network port P2 on each CNEN to the other Ethernet switch.
NOTE
For details on how to route and bundle cables, see
Cable Routing and Bundling
Network cables and cable ties
Optical fibers, fiber bundling tapes, 8 Gbit/s optical transceivers (applied when the CNEN
is equipped with a 10 Gbit/s network adapter)
Diagonal pliers
By default, each CNEN provides four 1 Gbit/s service network ports for connecting to the
service network, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 N8500 Installation (with the S2600T Storage System as the
12 General Cable Routing Description
Technology.
Figure 5-20.
Storage Unit)
and 13 Basic
63