Huawei OceanStor N8500 T Series Installation Manual page 350

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
4.
5.
Installing a Cable Tray to an SUC
1.
2.
3.
4.
Issue 02 (2015-09-22)
Use four M6 screws to secure the cable tray to the rear channels, as shown in step 2 of
Figure 17-4.
Figure 17-4 Installing the cable tray to the rear channels
Check the cable tray to ensure that it has been properly installed and secured.
Remove the two interface modules that impede cable tray installation from slots A5 and
B0, as shown in step 1 of
Insert the left and right buckles on the cable tray into the flanges on the rear edge of the
SUC, as shown in step 2 of
Use M3 screws to secure the cable tray to the rear edge of the SUC, as shown in step 3 of
Figure 17-5.
Replace the two removed interface modules, as shown in step 4 of
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 17-5.
Figure 17-5.
17 FAQ
Figure 17-5.
341