Powering On The N8500 - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Step 2 Secure the AC power cable with a retention clip.
1.
2.
3.
4.
Step 3 Route and bind the AC power cables.
----End

7.23 Powering On the N8500

This section explains how to power on the N8500 after it is installed and cabled.
Prerequisites
Before powering on the N8500, ensure that:
Issue 02 (2015-09-22)
While releasing the latch on the buckle (as shown in a of step 1 in
buckle to the joint between the AC power cable and socket (as shown in b of step 1 in
Figure 7-35).
Figure 7-35 Using a buckle to secure the AC power cable
Open the buckle, as shown in step 2 of
Lock the buckle towards the joint between the AC power cable and the connector and secure
the AC power cable to the power socket, as shown in step 3 of
NOTE
Before fully closing the buckle, slide the buckle to a proper position where the power cable can be
tightly secured.
Repeat Step 1 to Step 2
NOTE
For details on how to route and bundle AC power cables, see
13 Basic Cable Routing and Bundling
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 N8500 Installation (with S5600T, S5800T or S6800T
Figure 7-35.
for other power cables.
Technology.
Storage System as the Storage Unit)
Figure 7-35), slide the
Figure 7-35.
12 General Cable Routing Description and
217