Installing The Adjustable Guide Rails For An Suc - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Step 2 Place the floating nut mounting bar on the top of the floating nut and pull it into the hole until
it snaps into place, as shown in step 2 of
Step 3 Check the floating nut to ensure that it has been properly seated. as shown in step 3 of
7-3.
Step 4 Slide the clustered NAS engine enclosure into the cabinet, as shown in step 1 of
Step 5 Use M6 screws to secure the clustered NAS engine enclosure into the cabinet, as shown in step
2 of
Figure 7-4 Securing the clustered NAS engine enclosure into the cabinet
Step 6 Check that the clustered NAS engine enclosure is horizontally installed and tightly screwed.
Step 7 If you have more than one clustered NAS engine enclosure, Repeat
other clustered NAS engine enclosure to the cabinet.
----End

7.5 Installing the Adjustable Guide Rails for an SUC

Before assembling SUCs, you must install adjustable guide rails to bear them. With the
adjustable guide rails, SUCs can be placed into different depths of cabinets.
Prerequisites
The following tools and materials have been ready:
l
Issue 02 (2015-09-22)
Figure 7-4.
Phillips screwdriver (M3 to M6)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 N8500 Installation (with S5600T, S5800T or S6800T
Storage System as the Storage Unit)
Figure 7-3.
Figure
Figure 7-4.
Step 1 to Step 6, install
172