Huawei OceanStor N8500 T Series Installation Manual page 47

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
l
l
l
Procedure
Step 1 Use a Phillips screwdriver to remove M6 screws from a filler panel.
It is recommended that you reserve 1 U space between every two components to install a filler panel for proper
heat dissipation.
Step 2 Remove the filler panel from the cabinet.
Step 3 Use a floating nut mounting bar to remove floating nuts.
----End
Issue 02 (2015-09-22)
Phillips screwdriver (M3 to M6)
(Optional) Flat-head screwdriver (M3 to M6)
Floating nut mounting bar
NOTE
NOTE
If no floating nut mounting bar is available, use a flat-head screwdriver instead. When you use a flat-head
screwdriver to remove floating nuts, exercise special care to prevent it from injuring your hands or
damaging devices.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 N8500 Installation (with the S2600T Storage System as the
Storage Unit)
38