OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Step 2 On the Step 6-6: Start Deployment page, click Back and Next to start deployment again.
----End
16.3 How to Resolve The Problem Where LUNs are
mapped to a host in the owning host group of
initiators in the current cluster Is Displayed
During The Deployment Start Phase
Symptom
LUNs are mapped to a host in the owning host group of initiators
in the current cluster is displayed on the Step 6-6: Start Deployment page during
the initial configuration of the N8500 clustered NAS engine.
Possible Causes
All of the LUNs must be mapped to the host group.
Procedure
Step 1 Log in to the ISM by using the management IP address of the N8500, Click Host Groups, choose
the name of host group and click Mapped LUN, record all the name of LUNs belong to this
host group.
Issue 02 (2015-09-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16 Troubleshooting
334