Installing Front Panels - Huawei OceanStor N8500 T Series Installation Manual

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)

6.25 Installing Front Panels

After all components are installed and operating properly after being powered up, install front
panels for a neat appearance.
Procedure
Step 1 Install a front panel for the clustered NAS engine enclosures.
1.
2.
3.
4.
Step 2 Install a front panel for the SUC and SUD.
1.
2.
Issue 02 (2015-09-22)
Align the upper side of the front panel with that of the clustered NAS engine enclosure.
Keep pushing the two tabs towards the center of the front panel, as shown in step 1 of
Figure 6-40.
Figure 6-40 Installing a front panel for the clustered NAS engine enclosure
Use the front panel to cover the front side of SUC or SUC (as shown in step 2 of
6-40). Then, release the tabs.
Check the front panel to ensure that it has been proper installed and secured.
Align the upper side of the front panel with that of the SUC or SUD.
Keep pushing the tabs inby on the right and left sides of the front panel, as shown in step
1 of Figure 6-41 or Figure
NOTE
Figure 6-41 shows an example of installing a front panel for an SUC housing 3.5-inch hard disks.
For details on installing front panels for a 2 U SUD and an SUC housing 2.5-inch hard disks, see
Figure 6-41.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 N8500 Installation (with S5500T Storage System as the
6-42.
Storage Unit)
Figure
159