Huawei OceanStor N8500 T Series Installation Manual page 324

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
3.
Step 2 Install the wires.
When peeling off the sheath of the cable, do not damage the cable shield or the insulated wires.
1.
2.
Issue 02 (2015-09-22)
Figure 14-10 Peeling off the sheath
Max 5mm
30mm
Install a shielded iron cover on the cable shield, and then insert the shielded iron cover into
the sheath along the crack. Install the shielded iron cover correctly, as shown in
14-11.
Figure 14-11 Installing the shielded metal cover
NOTICE
Use the diagonal pliers to peel the cable shield, grounding wire, aluminum foil, and
polyester band off the first 20 mm of the cable, leaving only the insulated conductors.
Arrange the four twisted pairs properly and insert them into the wire fastening slot, as show
in Figure 14-12 and Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14-13. Maintain the original twist pitch of the twisted pairs.
14 Making Cables and Connectors
Figure
315