Huawei OceanStor N8500 T Series Installation Manual page 320

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Figure 14-2 Installing the boot of the RJ-45 connector
Step 3 Use a blade or a knife to peel off 20 mm of the sheath, as shown in
the insulation of the wires.
Figure 14-3 Peeling off the sheath
Step 4 Arrange the four pairs of wires properly according to the color codes followed by pins of the
RJ45 connector shown in
attention to the colors of pins).
Figure 14-4 Pins of the RJ45 connector
Pin 8
Issue 02 (2015-09-22)
Table 14-1, and
Pin 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14 Making Cables and Connectors
20 mm
Figure 14-4 shows pins of the RJ45 connector (pay
Figure 14-3. Do not damage
311