Huawei OceanStor N8500 T Series Installation Manual page 219

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Procedure
Step 1 Determine a connection mode.
The methods of connecting SUCs to the PC and managing the SUCs and SUDs are provided as
follows:
l Connect SUCs to the PC through management network ports.
l Procedure for connecting SUCs to the PC through a serial port is:
Step 2 Establish the connection between SUCs and the PC.
l Connect SUCs to the PC through management network ports.
l Procedure for connecting SUCs to the PC through a serial port is:
Step 3 Route and bind the cables.
Issue 02 (2015-09-22)
Figure 7-34 Connecting an SUC to the PC through a serial port
Manage SUCs and SUDs on the ISM.
Manage SUCs and SUDs on the CLI.
1. Connect one end of the two network cables to each management network port of SUC's
controllers A and B.
2. Connect the other end of the two network cables to the switch that is connected to the
PC.
1. Connect one end of RJ-45 to the serial port of SUC's controller A or B.
2. Connect the other end (DB9 end or RJ-45 end) of the serial port to the PC's serial port.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 N8500 Installation (with S5600T, S5800T or S6800T
Storage System as the Storage Unit)
210