Huawei OceanStor N8500 T Series Installation Manual page 321

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)
Table 14-1 Pair color codes
Pin
1
2
3
4
5
6
7
8
Step 5 Ensure that the wires are 13 mm to 15 mm long. Cut off the extra part if the wires are longer
than required, arrange the wires in the correct order, and then insert the wires into the RJ-45
connector, as shown in
Figure 14-5 Arranging the wires according to the color codes
Step 6 Use the RJ-45 crimping tool to crimp the connector. Ensure that the connector is put in the right
position in the RJ-45 crimping tool. After crimping, the metal cover on the connector must be
lower than other area on the connector.
Issue 02 (2015-09-22)
Insulation Colors
Straight
Through Cable
End A
White and orange
Orange
White and green
Blue
White and blue
Green
White and brown
Brown
Figure
NOTE
In Table 14-1, end A and end B refer to both ends of a network cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Straight
Through Cable
End B
White and orange
Orange
White and green
Blue
White and blue
Green
White and brown
Brown
14-5.
Wires arranged according
to the pair color codes
14 Making Cables and Connectors
Crossover Crossover
Cable End A Cable End B
White and orange White and green
Orange Green
White and green White and orange
Blue Blue
White and blue White and blue
Green Orange
White and brown White and brown
Brown Brown
312