Figure 5-6 Board Configuration Window; Figure 5-7 Topology Configuration Window - Huawei BTS3900 GSM Commissioning Manual

5 Commissioning the BTS (Transmission Unavailable)

Figure 5-6 Board Configuration window

Step 3 Double-click GTMU.
The Topology Configuration window is displayed, as shown in

Figure 5-7 Topology Configuration window

Step 4 Click Add RRU.
Set the parameters in the Deploy DRRU dialog box, as shown in
to DRFU, Card No. to 0, SFP No. to 0, and Hop No. to 1. These values are taken only as an
example in this section.
5-8
NOTE
In the transmission unavailable scenario, no site information is configured, thus, there is only the GTMU
in the Board Configuration window. The status of the GTMU is Active abnormal.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
BTS3900(A) GSM
Commissioning Guide
Figure 5-7.
Figure 5-8. Set Card Type
Issue 02 (2009-04-20)