GE B30 Communications Manual page 467

CHAPTER 3: IEC 61850 COMMUNICATION
Table 3-230: PIXIT for GOOSE publish model
ID Edition
Gp1 1,2
Gp3 1,2
Gp4 1,2
Gp5 1,2
Gp7 1,2
Table 3-231: PIXIT for GOOSE subscribe model
ID Edition
Gs1 1,2
Gs2 1,2
Gs3 1,2
Gs4 1,2
Gs5 1,2
Gs8 1,2
Gs9 1,2
Gs10 1,2
Table 3-232: PIXIT for GOOSE performance
ID Edition
Gf1 1,2
Gf2 1,2
Gf3 1,2
UR FAMILY – COMMUNICATIONS GUIDE
Description
Can the test (Ed1) / simulation (Ed2) flag in the published
GOOSE be set?
Published FCD supported common data classes are
What is the slow retransmission time?
Is it fixed or configurable?
What is the fastest retransmission time?
Is it fixed or configurable?
What is the initial GOOSE sqNum after restart?
Description
What elements of a subscribed GOOSE header are
checked to decide the message is valid and the
allData values are accepted? If yes, describe the
conditions.
Notes:
• The VLAN tag may be removed by an Ethernet switch
and shall not be checked
• The simulation flag shall always be checked (Ed2)
• The ndsCom shall always be checked (Ed2)
When is a subscribed GOOSE marked as lost?
(TAL = time allowed to live value from the last received
GOOSE message)
What is the behavior when one or more subscribed
GOOSE messages is not received or syntactically
incorrect (missing GOOSE)?
What is the behavior when a subscribed GOOSE
message is out-of-order?
What is the behavior when a subscribed GOOSE
message is duplicated?
Subscribed FCD supported common data classes are... All FCDs that are defined by GOOSE
Are subscribed GOOSE with test=T (Ed1) / simulation=T
(Ed2) accepted in test/simulation mode?
Max number of dataset members?
Description
Performance class
GOOSE ping-pong processing method Scan cycle based
Application logic scan cycle (ms)
PIXIT CONFORMANCE STATEMENT
Value / Clarification
Y
The "S" bit in the GOOSE
"Reserved 1" word is not set.
All instantiated FCDs
Arrays are supported
1000 to 300000 ms
Configured by SCL or GoCB
MaxTime
1 to 100 ms
Configured by SCL or GoCB
MinTime
sqNum = 1
Value / Clarification
Y destination MAC address
Y APPID
Y gocbRef
Y timeAllowedtoLive
Y datSet
Y goID
N t
Y stNum
N sqNum
Y simulation / test
Y confRev
Y ndsCom
Y numDatSetEntries
Message does not arrive prior to TAL
When a subscribed GOOSE is marked
as lost, a Self Test Alarm target is
generated, and all internal data that is
derived from GOOSE data is configured
to default values
Sequence number order (with no state
number change) is not checked. State
number order is checked; the older
message is ignored.
Duplicate message is ignored
publishers in the CID file.
Arrays are supported.
Y
64
Value / Clarification
P1
Max. 1/8 cycle (2.0 ms @60 Hz, 2.5
ms @50 Hz) or 100 ms
Min.
(configurable)
3
3-229