GE B30 Communications Manual page 349

CHAPTER 3: IEC 61850 COMMUNICATION
LNName: TrBusPTRC#
data obj. data attribute Type
dirGeneral ENUMERATED
InRefαα ORG
setSrcRef ObjectReference SP
setSrcCB ObjectReference SP
InRef99 ORG
setSrcRef ObjectReference SP
setSrcCB ObjectReference SP
BlkRef1 ORG
setSrcRef ObjectReference SP
setSrcCB ObjectReference SP
3.5.2.77 Trip output (TrOut)
This element is instantiated in the following products: C60, D60, L60, L90.
Table 3-126: Trip output data objects
LNName: TrOutPTRC1
data obj. data attribute Type
Tr ACT
general BOOLEAN
Tr3p ACT
general BOOLEAN
Tr1p ACT
general BOOLEAN
phsA BOOLEAN
phsB BOOLEAN
phsC BOOLEAN
StrRec3p SPS
stVal BOOLEAN
Tr3pFrcd SPS
stVal BOOLEAN
StrZ2PhDl SPS
stVal BOOLEAN
StrZ2GndDl SPS
stVal BOOLEAN
InRef3α ORG
setSrcRef ObjectReference SP
setSrcCB ObjectReference SP
InRef1α ORG
setSrcRef ObjectReference SP
setSrcCB ObjectReference SP
InRef2α ORG
setSrcRef ObjectReference SP
setSrcCB ObjectReference SP
InRef01 ORG
setSrcRef ObjectReference SP
UR FAMILY – COMMUNICATIONS GUIDE
LDevice inst: Prot UR element: Trip Bus element #
FC UR Name
ST
TRIP BUS # INPUT α setting
TRIP BUS # RESET setting
TRIP BUS # BLOCK.
LDevice inst: Prot UR element: Trip Output element
FC UR Name
ST TRIP OUTPUT OP
ST TRIP 3-POLE
ST TRIP 1-POLE
ST TRIP PHASE A
ST TRIP PHASE B
ST TRIP PHASE C
ST TRIP AR INIT 3-POLE
ST TRIP FORCE 3-POLE
ST TRIP Z2PH TMR INIT
ST TRIP Z2GR TMR INIT
TRIP 3-POLE INPUT-α setting
TRIP 1-POLE INPUT-α setting
TRIP RECLOSE INPUT-α setting
START TMR Z2PH Inp1 setting
MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
Description
0, the code for unknown
TRIP BUS # INPUT α setting.
reference to the data attribute to input
source GoCB of input if via GOOSE
TRIP BUS # RESET setting, which when On
resets the non-volatile set-dominant
input conditions latch.
reference to the data attribute to input
source GoCB of input if via GOOSE
TRIP BUS # BLOCK setting.
reference to the data attribute to input
source GoCB of input if via GOOSE
Description
TRIP OUTPUT OP (any trip) operand
TRIP 3-POLE operand
general is TRIP 1-POLE operand, phsA is
TRIP PHASE A operand, phsB is TRIP
PHASE B operand and phsC is TRIP PHASE
C operand
TRIP AR INIT 3-POLE operand
TRIP FORCE 3-POLE operand (3-pole trip
mode is being forced)
TRIP Z2PH TMR INIT operand
TRIP Z2GR TMR INIT operand
TRIP 3-POLE INPUT-α setting.
reference to the data attribute to input
source GoCB of input if via GOOSE
TRIP 1-POLE INPUT-α setting.
reference to the data attribute to input
source GoCB of input if via GOOSE
TRIP RECLOSE INPUT-α setting.
reference to the data attribute to input
source GoCB of input if via GOOSE
START TMR Z2PH Inp1 setting.
reference to the data attribute to input
R/W/C
R
R
R/C
R/C
R
R/C
R/C
R
R/C
R/C
3
R/W/C
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R/C
R/C
R
R/C
R/C
R
R/C
R/C
R
R/C
3-111