Starter Motor Disassembly; Starter Motor Inspection - Honda Motorcycle Service Manual

ELECTRIC STARTERISTARTER CLUTCH
STARTER MOTOR
DISASSEMBLY
Before disassembling the starter motor, mark the index lines
on the case and covers so the starter can be assembled
correctly later.
Remove the starter motor case screws and remove the
covers.
NOTE
For models with shims between the armature and
cover, record the location and number of shims and their
INSPECTION
Check for continuity of the starter motor case
.
Between the cable terminal and the case. Their should be
no continuity.
.
Between the cable terminal and the brush (black wire).
There should be continuity.
If the readings are abnormal, replace the case with a new
one.
Measure the brush length
Replace the brush if it is worn beyond the service limit speci-
fied in the Model Soecific manual.
BRUSH
Check for continuity between the
63
and
O
terminals of the
TERMINA~
brush holder.
If there is continuity, replace the holder with a new one.
Date of Issue: March, 1995
o
HONDA MOTOR CO.,LTD.
24 -3