REAR SUSPENSION
INSTALLATION
Check the pivot collars, dust seals, bushings and/or bearings
for wear or damage and replace parts if necessary. Refer to
the Model Specific manual for replacement procedures.
Refer to the Model Specific manual, if your motorcycle is
equipped with needle roller or spherical bearings.
Apply molybdenum disulfide grease to all pivot points
PIVOT COLLAR
Pack the grease fittings (if installed) with grease
Reassemble the suspension linkage with special attention to
the proper installation directions, and loosely tighten the pivot
bolts.
Reinstall the suspension linkage assembly on to the frame and
tighten each bolt to the specified torque.
Refer to the Model Specific manual for the proper torque
specifications.
GREASE FITTING
PIVOT BOLT
Date of Issue : March,
1995
0
HONDA MOTOR CO.,LTD.