Wheel Bearing Replacement; Wheel Bearing Removal; Wheel Bearing Installation - Honda Motorcycle Service Manual

WHEEL BEARING REPLACEMENT
before removing the wheel bearings.
R E M O V A L
Remove the wheel.
Remove
the dust seal, side collar, brake drum, and
,
.
-
. . .
-
. .
speedometer gearbox retainer
Rear wheel:
Chain drive type: Remove the driven sprocket.
Shaft drive type: Remove the driven flange
Remove the right and left wheel bearings with the bearing
remover shaft and remover head.
INSTALLATION
NOTE
Right and left bearings have a specific installation order.
Refer to the Model Specific manual for which bearing to
I
Drive in a new bearing
\
~p~
Check the distance collar for the proper installation directi
/ \
' I
and install the collar.
ion
Install the other bearlng.
NOTE
1
.
Replace right and left bearings In pairs 30 not re-use
bearings.
Single side sealed bearings:
Install the bearing with the sealed
Fully sealed bearings:
Install the bearing with its StamPeC
side
I size
facing out.
mark toward the
/
outside
1
Date of Issue: March.
1995
16-10
0
HONDA MOTOR CO.,LTD.