6. EXHAUST SYSTEM
SERVICE INFORMATION
6-1
SYSTEM DESCRIPTION
6-2
TROUBLESHOOTING
6- 1
SERVICE INFORMATION
burns may result if the exhaust system is not allowed to cool before components are removed or serviced.
m
0
Always replace the exhaust pipe gasket when removing the exhaust pipe from the engine.
0
Note the positions of the clamps installed between the exhaust pipe and muffler, the tab on the clamp should align with the
groove on the muffler.
M e n installing the exhaust system. install all the fasteners loosely. Always tighten the exhaust clamp nut first, then
tighten the mounting fasteners. If you tighten the mounting fasteners first, the exhaust pipe may not seat properly.
Always inspect the exhaust system for leaks after installation.
TROUBLESHOOTI NG
Excessive exhaust noise
Broken exhaust system
.
Exhaust gas leaks
Poor performance
.
Deformed exhaust system
Exhaust gas leaks
Clogged muffler
Date of Issue : March, 1995
o
HONDA MOTOR co.,LTD.
6- 1