Electric Starteristarter Clutch - Honda Motorcycle Service Manual

ELECTRIC STARTERISTARTER CLUTCH
Starter motor will not turn.
Check for a burnt main or sub fuse before servicing.
For models with a centrifugal clutch. check that the brake light switch is correctly adjusted. .
Check that the side stand is positioned and/or transmission is placed in the conditions under which the engine can
be started on models which employ the side stand ignition cut-off switch.
With the ignition switchnON" and engine stop Connect the starter motor
(+I
terminal to the
switch at "RUN", check f o r a 'click" sound
battery positive terminal.
from starter relay switch when starter button is
(Because a large amount of current flows, do
not use thin wires).
I
I
I
Starter motor turns Starter motor
1
does not turn
i
Disconnect starter relay switch connector, and
NO CONTINUITY*.
check the relay coil ground wire.
I
relay switch connector.
Check the starter relay operation.
NORMAL-.
ABNORMAL
1
Loose or discon-
.
Faulty starter motor
nected wire or
cable
Faulty starter relay
switch
(For operation
check, see page
24-61
Faulty neutral switch
(Appropriate model onlyl
Faulty clutch switch
(Appropriate model only)
Faulty starter switch
(Centrifugal clutch model onlyl
Faulty side stand switch
(Appropriate model only)
Loose or poor contact at connector
Open circuit in wire harness
Faulty ignition switch
Broken starter switch wire
(Manual clutch model only)
Faulty brake light switch
(Appropriate model only)
Loose or poor contact at connector
Open circuit in wire harness
Loose or poor contact at starter relay switch
connector
Faulty starter relay switch
Date of Issue : March, 1995
24-2
o
HONDA MOTOR co.,LTD.