Drive Pulley Face Installation - Honda Motorcycle Service Manual

V-MATIC BELT DRIVE SYSTEM
Coat the inside of the drive face shaft w i t h 4-5 g of grease.
Install the shaft with the splined hole facing out.
NOTE
Do not get the grease on the pulley face. Remove any
1
misplaced grease with a degreasing agent.
Install the movable face assembly on the crankshaft.
DRIVE PULLEY FACE INSTALLATION
Squeeze the drive belt into the pulley groove and pull the drive
belt over the drive face shaft.
Install t h
NOTE
e drive pulley face, washer
2
tnd nut.
-
Be sure both pulley faces are free of oil and grease.
Hold the drive pulley face using the drive pulley holder and
tighten the nut t o the specified torque.
DRIVE PULLEY HOLDER
07923-KM10000
1
DRIVE FACE
I
SQUEEZF
I
DRIVE
BELT
Date of Issue: Sep., 1988
0
HONDA MOTOR CO.. LTD.