20. FRAME/BODY PANELS
SERVICE INFORMATION
20-1
DESCRIPTION
TROUBLESHOOTING
20-1
INSPECTION
SERVICE INFORMATION
Although it is possible to weld some cracked frames and straighten some frames that are slightly bent, it is best to
replace the frame with a new one when it is damaged.
*
Generally speaking, plastic body panels cannot be repaired and, therefore, must be replaced.
0
It is possible that a front end collision will bend the steering head, but not the fork, wheel, or even the axle.
TROUBLESHOOTING
Failure of the front suspension, steering, or rear suspension may damage the frame enough t o require replacement
-
Refer to section 18 for front suspension and steering inspections.
.
Refer to section 19 for rear suspension inspection.
Abnormal engine vibration
Cracked or damaged engine mounts
.
Cracked, damaged or bent welded portions
.
Bent or damaged frame
Engine problems
Abnormal noise when riding (banging or creaking)
-
Damaged or bent engine mounts
.
Damaged welded points
.
Damaged or bent frame
Steers to one side when under acceleration or deceleration
.
Bent frame
Bent fork
Bent swingarm
Date of Issue: March. 1995
0
HONDA MOTOR CO.,LTD.
20-
1