Pinion Gear Removal/Shim Replacement - Honda Motorcycle Service Manual

FINAL DRIVEIOUTPUT SHAFT
Replace the pinion shim with a thinner one if the contacts are
too low.
I
TOO LOW
DRIVE SlDE COAST SIDE
PINION GEAR REMOVALISHIM REPLACEMENT
Place the final gear case in a soft jaw vise or use a shop towel
Install the pinion joint holder onto the pinion joint and remove
the pinion shaft nut.
Remove the tool and the pinion joint.
PINION JOINT HOLDER
I
Remove the bolt and the retainer lock plate.
Remove the pinion retainer with the pinion retainer wrench.
LOCK PLATE
BOLT
I
Pull off the pinion assembly with the pinion puller.
RETAINER
WRENCH
I
PINION PULLER
Date of Issue: March,
1995
o
HONDA MOTOR CO.,LTD.
15-1 5