Steering Stem Removal - Honda Motorcycle Service Manual

FRONT SUSPENSION
Spring pin type:
Insert the weight into the handlebar and turn it until the spring
pin hole is aligned with the hole in the handlebar.
Secure the weight with the spring pin using pin driver
STEERING STEM
If the vehicle has been involved in a collision, the steering stem
may be damaged.
REMOVAL
Telescopic Type:
Remove the handlebar
Remove the ignition switch and/or fuse holder if either are at-
tached t o the top fork bridge.
Refer t o the Model Specific Manual for specific procedures
Remove the following:
I
Stem nut and washer.
.
Front wheel and fork.
STEERING STEM NUT
Fork top bridge.
Horn andior brake hose joint, if either are attached.
Date of Issue
:
March,
1995
0
HONDA MOTOR CO.,LTD.
I
The lock washer tabs must be bent down in order t o remove
the lock nut.
Remove the lock nut and lock washer.
LOCK NUT
LOCK WASHER