Udder Spring, Spring Seat; Mainshaft; Clutch Spring - Honda Motorcycle Service Manual

CLUTCH
Judder Spring, Spring Seat
(Types A and
Bl
JUDD? SPRING
Check the judder spring and spring seat for deformation, war-
page or damage; replace as necessary.
A damaged or warped spring seat will cause the judder spring
to be pressed unevenly.
A damaged judder spring also causes the weak contact bet-
ween the discs and plates or uneven disclplate contact.
Mainshaft
(Types A, B and Cl
Measure the mainshaft O.D. at the sliding surface, if the clutch
outer guide slides on the mainshaft.
t
SPRING SEAT
Replace the mainshaft if the service limit is exceeded.
Clutch Spring
(Types A, B and D l
Measure the clutch spring free length; replace the springs if
the measurement is not within the service limit.
NOTE
~
~-~
-
If the vehicle has been used for a long time, the clutch
spring free length will be shorter, because the clutch
springs are compressed while the clutch is disengaged.
Replace the clutch springs as a set so that the discs con-
tact the clutch plates evenly.
Clutch Spring
(Type Cl
Measure the free height of the clutch spring; replace the spring
if the measurement is lower than service limit.
Date of Issue: Nov., 1989
O
HONDA MOTOR CO., LTD