CYLINDER HEAD
p~
Inspect the valve seat face for:
Uneven seat width:
-
Bent or collapsed valve stem;
Replace the valve and reface the valve Seat.
.
Damaged face:
-
Replace the valve and reface the valve Seat
.
Contact area (too high or too low).
-
Reface the valve seat.
I
/
DAMAGED FACE
TOO LOW
TOO HIGH
VALVE SEAT REFACING
i
NOTE
.
Follow the refacer manufactuer's operating instructions.
-
Reface the valve seat whenever the valve guide has
been reolaced.
If the contact area is too high on the valve, the seat must be
lowered using a 32 degree flat cutter.
If the contact area is too low on the valve, the seat must be
raised using a 60 degree inner cutter. Refinish the seat t o
specifications, using a 45 degree finish cutter.
CONTACT
%i i j y --%
TOO HIGH
CONTACT TOO LOW
-
Date of Issue
:
March, 1 995
9-1 6
o
HONDA MOTOR CO.,LTD.