Clutch Switch; Clutch Switch Inspection; Brake Light Switch; Brake Light Switch Inspection - Honda Motorcycle Service Manual

CLUTCH SWITCH
The clutch switch allows the starter motor t o work if the
engine stalls while in gear by disengaging the clutch.
INSPECTION
Check the starter system if the starter motor turns with the
transmission in positions other than neutral.
The starter motor should turn with the clutch lever pulled
inand not turn with the lever released while in gear.
If the starter system is not normal, check the following:
Disconnect the wire from the clutch switch and check for con-
tinuity between the clutch switch terminals while operating
the clutch lever.
When the clutch lever is pulled in:
There should be continuity between the terminals
When the clutch lever is released:
There should be no continuity between the terminals.
If the clutch switch is normal, check the following:
Check for shorted wire between the starter relay switch
and the clutch switch
Check the neutral switch
BRAKE LIGHT SWITCH
The brake light comes on when the brake lever (or pedal) is
applied.
Starter motor-equipped scooters: To prevent the accidental
start up of the scooter, current does not flow to the starter
motor unless the brake lever (or pedal) is applied.
INSPECTION
If the brake light dose not come on, check the following:
Burnt bulb.
Poor connection of the brake light switch connector.
IGNITION MAIN
SWITCH FUSE
FRONT
I I
BRAKE LIGHT
I
REAR BRAKE
LIGHT SWITCH
SWITCH
Date of Issue: March, 1995
0
HONDA MOTOR CO.,LTD