Gearshift Linkage Inspection/Installation - Honda CRF1000 Shop Manual

dummyhead dummyhead
DUAL CLUTCH TRANSMISSION (DCT) (CRF1000D)
INSPECTION
Inspect the following parts for scratch, damage,
abnormal wear, or deformation.
– Gearshift spindle, spindle arm, return spring
– Drum shifter guide plate
– Drum shifter
– Ratchet pawls
– Plungers
– Plunger springs
Replace if necessary.
INSTALLATION
Install the oil seal [1] until it is in position as shown.
Apply grease to the oil seal lips.
Install the following:
– Dowel pin [1]
– Shift drum center dowel pin [2]
– Stopper arm return spring [3]
– Stopper arm collar [4]
– Shift drum stopper arm [5]
13-76
[1]
11.9 – 12.4 mm
(0.47 – 0.49 in)
[5]
[1] [4]
[1]
[2]
[3]