Installing A Cisco Nexus 7009 Chassis; Preparing To Install The Switch - Cisco Nexus 7000 Hardware Installation And Reference Manual

Installing a Cisco Nexus 7004 Chassis
This chapter describes how to install a new or relocated Cisco Nexus 7004 chassis in a rack or cabinet.
For information about installing other Cisco Nexus 7000 Series chassis or power supplies, see the
following chapters:
•
•
•
•
This chapter includes the following sections:
•
•
•
•
•
•
Preparing to Install the Switch
This section includes the following topics:
•
•
•
You must set up one two- or four-post, 19-inch EIA rack or cabinet before you can install the Cisco
Note
Nexus 7004 chassis. Make sure that you order the rack or cabinet and have it delivered before installing
the chassis.
OL-23069-07
Chapter 3, "Installing a Cisco Nexus 7009 Chassis"
Chapter 4, "Installing a Cisco Nexus 7010 Chassis"
Chapter 5, "Installing a Cisco Nexus 7018 Chassis"
Chapter 6, "Installing Power Supplies"
Preparing to Install the Switch, page 2-1
Installing the Chassis, page 2-4
Grounding the Cisco Nexus 7004 Chassis, page 2-9
Installing the Cable Management Frames, page 2-11
Installing USB Storage Media in a Supervisor 2 or 2E Module, page 2-12
Installing the Air Filter, page 2-13
Required Tools, page 2-2
Installing a Rack or Cabinet, page 2-2
Unpacking and Inspecting a New Switch, page 2-3
C H A P T E R
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
2
2-1