Cisco Nexus 7000 Hardware Installation And Reference Manual page 147

Chapter 5 Installing a Cisco Nexus 7018 Chassis
Figure 5-16
1 Four M4x8 pan-head screws that fasten the
hood to the chassis.
Tighten the four M4x8 screws that fasten the hinge bracket to the chassis to 11 to 15 in-lb (1.2 to
Step 5
1.7 N·m).
Tighten the four M4x8 screws that fasten the hinge bracket to the cable management frame to 11 to
Step 6
15 in-lb (1.2 to 1.7 N·m).
Fasten the four ball-point studs (51-5008-01), each one with a washer (49-0430-01), to the bottom
Step 7
portion of the chassis, one stud by each corner of the air intake area as shown in
OL-23069-07
Attaching the Hinge Bracket to the Cable Management Frame and Chassis
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Installing the Front Door and Air Intake Frame
2 Four M4x8 pan-head screws that fasten the
hood to the left and right cable management
assemblies.
Figure 5-17.
5-25