Connecting Or Disconnecting A 1000Base-T Port - Cisco Nexus 7000 Hardware Installation And Reference Manual

Chapter 7 Connecting the Cisco Nexus 7000 Series Switch to the Network
Table 7-1 Connectors and Cables Supported by I/O Modules (continued)
Module
8-port 10-Gigabit Ethernet (N7K-M108X2-12L)
24-port 10-Gigabit Ethernet (N7K-M224XP-23L)
6-Port 40-Gigabit Ethernet (N7K-M206FQ-23L)
2-Port 100-Gigabit Ethernet (N7K-M202CF-22L)
1. FETs are used only when connecting this I/O module to a Fabric Extender (FEX).
2. Requires Version 2 or later version.
3. Requires the CVR-X2-SFP10G OneX Converter Module (X2 to SFP+ adapter)
This section includes the following topics:
•
•

Connecting or Disconnecting a 1000BASE-T Port

This section includes the following topics:
•
•
OL-23069-07
Connecting or Disconnecting a 1000BASE-T Port, page 7-9
Connecting or Disconnecting an SFP, SFP+, or X2 Port, page 7-10
Connecting a 1000BASE-T Port to the Network, page 7-10
Disconnecting a 1000BASE-T Port from the Network, page 7-10
Port Type Connector/Transceiver
10GBASE-X X2 X2-10GB-ER
X2-10GB-LR
X2-10GB-LRM/
X2-10GB-LX4
X2-10GB-SR
X2-10GB-ZR
X2-10GB-CX4
10GBASE-X2 DWDM-xxxx
10GBASE-X SFP+ SFP-10G-LR
SFP-10G-LRM
SFP-10G-SR
SFP-H10GB-CUxM
10GBASE-X SFP+ DWDM-SFP10G-xx.xx
FET-10G
SFP-10G-ER
SFP-10G-LR
SFP-10G-LRM
SFP-10G-SR
SFP-10G-ZR
SFP-H10GB-CUxM
SFP-H10GB-ACUxM
QSFP-40G-LR4
QSFP-40G-SR4
CFP-100G-LR4
CFP-100G-SR10
CFP-40G-LR4
CFP-40G-SR4
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Connecting an I/O Module
Cable Type
Fiber optic
Copper
Copper
3
Fiber optic
3
3
3
Fiber optic
2
Copper
Fiber optic
Fiber optic
7-9