Cisco Nexus 7000 Hardware Installation And Reference Manual page 331

Chapter 10 Installing or Replacing Components
Figure 10-27
1
Four M4x8 pan-head screws fastened to the
chassis
Remove the top cover from the chassis and the two upper cable management assemblies.
Step 2
For the upper cable management assembly on the left, loosen and remove five M4x10 screws, and then
Step 3
lift off the assembly as shown in
Repeat Step 3 for the upper cable management assembly on the right side.
Step 4
OL-23069-07
Replacing the Cable Management Frame on the Cisco Nexus 7018 Chassis
Detaching the Top Cover from the Upper-Cable-Management Assemblies and Chassis
Figure 10-28.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
2
Four M4x8 pan-head screws fastened to the
two upper cable management assemblies
10-73