Cisco Nexus 7000 Hardware Installation And Reference Manual page 408

10-Gigabit SFP+ Transceivers and Fabric Extender Transceivers
2. Requires the OneX Converter Module (part number CVR-X2-SFP10G) when this transceiver is used with the 8-port 10-GB
3. Requires revision 2 of this transceiver.
Figure B-4
SFP+ transceivers and FETs, see
Table
Figure B-4
1
2
3
Table B-12 Cable Specifications for the 10-Gigabit SFP+ Transceivers and FETs
Transceiver Cable Type
FET-10G MMF
SFP-10G-ER SMF
SFP-10G-LR SMF
SFP-10G-LRM MMF
SMF
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
B-8
I/O module.
identifies the major features of these transceivers. For the cable specifications that apply to
B-13. For the environmental specifications that apply to these transceivers, see
SFP+ Transceivers and FETs
Receive optical bore
Transmit optical bore
Clasp shown in closed position
Connector
Type
Dual LC/PC 850
Dual LC/PC 1550
Dual LC/PC 1310
Dual LC/PC 1310
Table B-12. For the physical and environmental specifications, see
4
Clasp shown in open position
5
Dust plug
Wavelength Core Size
(nm) (microns)
50
50
G.652 fiber —
G.652 fiber —
62.5
50
50
G.652
Appendix B Transceivers and Module Connectors
Table
Modal
Bandwidth Maximum Cable
(MHz-km) Distance
500 82 feet (25 meters)
2000 328 feet (100 meters)
24.9 miles (40 km)
6.2 miles (10 km)
500 722 feet (220 meters)
400 328 feet (100 meters)
500 722 feet (220 meters)
— 984 feet (300 meters)
B-14.
OL-23069-07