Installing a Cisco Nexus 7010 Chassis
This chapter describes how to install a new or relocated Cisco Nexus 7010 chassis in a rack or cabinet.
For information about installing other Cisco Nexus 7000 Series chassis or power supplies, see the
following chapters:
•
•
•
•
This chapter includes the following sections:
•
•
•
•
•
•
•
Preparing to Install the Switch
This section includes the following topics:
•
•
•
You must set up one four-post, 19-inch EIA rack or cabinet before you can install the Cisco Nexus 7010
Note
chassis. Make sure that you order the rack or cabinet and have it delivered before installing the chassis.
OL-23069-07
Chapter 2, "Installing a Cisco Nexus 7004 Chassis"
Chapter 3, "Installing a Cisco Nexus 7009 Chassis."
Chapter 5, "Installing a Cisco Nexus 7018 Chassis."
Chapter 6, "Installing Power Supplies."
Preparing to Install the Switch, page 4-1
Installing the Bottom-Support Rails on the Rack, page 4-4
Unpacking and Inspecting a New Switch, page 4-3
C H A P T E R
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
4
4-1