Cisco Nexus 7000 Hardware Installation And Reference Manual page 310

Replacing or Upgrading a Cisco Nexus 7010 or 7018 Fabric Module During Operations
3 Place the foam padding with the middle cut
out on top of the foam padding in the box.
4 Place the trifold piece of cardboard inside the
hole in the foam padding.
5
Put the fabric module in an ESD bag (not
shown) and then place the bagged module in
the hole of the padding.
Figure 10-16
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
10-52
Packing a Cisco Nexus 7018 Fabric Module (N7K-C7018-FAB-1)
Chapter 10 Installing or Replacing Components
8 Fold the wide flaps over the top of the box.
9 Tape the wide flaps together and to the box.
OL-23069-07