Cisco Nexus 7000 Hardware Installation And Reference Manual page 322

Replacing the Front Doors and Frame Assembly on the Cisco Nexus 7010 Chassis
Figure 10-19
1 Right side frame.
2 Left side frame.
Realign the EMI panel to the air intake area on the chassis and tighten its four captive screws to
d.
8 in-lb (0.9 N·m).
Remove the front doors by following these steps:
Step 2
Unscrew the three screws that hold one door frame assembly to the chassis until the screws are no
a.
longer in the chassis. Remove the door assembly from the chassis. See
Repeat step 4a for the other door assembly.
b.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
10-64
Removing the Side Frame Assemblies from the EMI Panel
Chapter 10 Installing or Replacing Components
3 Unscrew two 6-32 x 1/2-inch flat-head screws
to remove the right side frame.
4 Unscrew two 6-32 x 1/2-inch flat-head screws
to remove the left side frame.
Figure 10-20.
OL-23069-07