Cisco Nexus 7000 Hardware Installation And Reference Manual page 277

Chapter 10 Installing or Replacing Components
To prevent ESD damage, avoid touching the electronic circuitry and prevent anything else from coming
Caution
in contact with the circuitry.
If you are removing the module from a Cisco Nexus 7010 chassis, rotate the module 90 degrees
Step 9
counterclockwise so that it is horizontal and you can see its circuitry from above.
Place the removed module in an antistatic bag.
Step 10
Repack the bagged I/O module in its original packing materials as shown in
Step 11
Figure 10-6
OL-23069-07
Repacking a Supervisor Module
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Replacing a Supervisor Module
Figure 10-6.
10-19