Cisco Nexus 7000 Hardware Installation And Reference Manual page 263

Chapter 10 Installing or Replacing Components
Figure 10-1
1 Open the box.
2 Insert a foam cushion.
3 Insert the cardboard holder with the U-shaped
end facing upwards.
4 Insert the power supply unit with the small
end going in the box first.
OL-23069-07
Repacking a 6-kW AC Power Supply Unit
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Replacing an AC Power Supply Unit During Operations
5 Insert a foam cushion onto the top of the
power supply unit.
6 Fold the two narrow flaps over the top
cushion.
7 Fold the two wide flaps over the top of the
box.
8 Tape the wide flaps together and to the box.
10-5