Cisco Nexus 7000 Hardware Installation And Reference Manual page 31

Chapter 1 Overview
1 Air intake area for power supply units
2 Fabric modules (up to 5) (N7K-C7009-FAB-2)
3 Cable management side frame
4 I/O or NAM modules (1 to 7 modules in slots 3 to 9). These modules
are a combination of the following:
F1 Series
•
32-port 1- and 10-Gigabit Ethernet I/O modules
–
(N7K-F132XP-15)
48-port 1-/10-GBASE-T with XL option (N7K-F248XT-25E)
–
F2 Series
•
48-port 1-/10-Gigabit SFP+ with XL option and FEX support
–
(N7K-F248XP-25 and N7K-F248XP-25E
M1 Series
•
48-port 10/100/1000 I/O modules (N7K-M148GT-11)
–
48-port 10/100/1000 I/O modules with XL option
–
(N7K-M148GT-11L)
48-port 1-Gigabit Ethernet I/O modules (N7K-M148GS-11)
–
48-port 1-Gigabit Ethernet I/O modules with XL option
–
(N7K-M148GS-11L)
32-port 10-Gigabit Ethernet I/O modules with FEX support
–
(N7K-M132XP-12)
32-port 10-Gigabit Ethernet I/O modules with XL option and
–
FEX support (N7K-M132XP-12L)
8-port 10-Gigabit Ethernet I/O modules with XL option
–
(N7K-M108X2-12L)
M2 Series
•
24-port 10-Gigabit Ethernet I/O modules with XL option and
–
FEX support (N7K-M224XP-23L)
6-port 40-Gigabit Ethernet I/O modules with XL option
–
(N7K-M206XP-23L)
– 2-port 100-Gigabit Ethernet I/O modules with XL option
(N7K-M202XP-23L)
Alternatively, one or more of these slots can be used for Network
Analysis Modules (NAMs) (N7K-SM-NAM-K9).
OL-23069-07
5
6
7
8
1
)
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Cisco Nexus 7000 Series
Supervisor modules (1 or 2 modules in slots
1 and 2). These modules are of only one of
the following types (if installing two
supervisor modules, both modules must be
the same type with the same amount of
memory):
• Supervisor 1 (N7K-SUP1)
• Supervisor 2 (N7K-SUP2)
• Supervisor 2 Enhanced (N7K-SUP2E)
Cable management top hood with LEDs
Air intake areas for supervisor, I/O, and
fabric modules
Handles used for adjusting placement of
chassis on mechanical lift
1-7