Cisco Nexus 7000 Hardware Installation And Reference Manual page 338

Chapter 10 Installing or Replacing Components
Replacing the Cable Management Frame on the Cisco Nexus 7018 Chassis
Figure 10-33 Positioning the Top Cover with the Upper Cable Management Assemblies and the
Switch Chassis
1 2
Alignment pins Alignment holes
Use four M4x8 pan-head screws to loosely fasten the top cover to the chassis (see Callout 1 in
Step 7
Figure 10-34).
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
10-80
OL-23069-07