Cisco Nexus 7000 Hardware Installation And Reference Manual page 120

Installing the Front Doors and Frame Assembly
Figure 4-15
1 Right side frame.
2
Left side frame.
c. Realign the EMI panel to the air intake area on the chassis, screw its four captive screws to the
chassis, and tighten the captive screws to 8 in-lb (0.9 N·m).
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
4-22
Attaching the Side Frame Assemblies to the EMI Panel
3 Use two 6-32 x 1/2-inch flat-head screws to attach the right side
frame to the right side of the EMI panel. Tighten the screws to
8 in-lb (0.9 N·m).
4
Use two 6-32 x 1/2-inch flat-head screws to attach the left side
frame to the left side of the EMI panel. Tighten the screws to 8
in-lb (0.9 N·m).
Chapter 4 Installing a Cisco Nexus 7010 Chassis
OL-23069-07